Download The Full
Bertch Bath 2008 Spec Book
(PDF-3.5MB)

Premium

Doors and Drawer Fronts:
Doors and Drawer Fronts are manufactured in house by Bertch Craftsmen.

Drawer Boxes:
Drawer box sides, front and back are 5/8” thick solid birch, dovetailed at all four corners.
Drawer bottom is 1/4” thick plywood.

Drawer Slides:
Drawer slides are softmotion full extension undermount undermount drawer glides allow an
extra 3" in length to the actual drawer box on 21" deep base cabinets. They have a load rating
of 100 lbs. per pair.

Frames:
Face frames are 1 1/2” x 3/4” solid wood.

Case Work:
Sides: All cabinet sides are 3/4” thick, veneer core plywood with wood veneer both sides.

Backs:
Backs are 1/4” natural birch plywood. Backs are set into solid wood cleats

Interiors:
Interiors are completely finished in natural birch on all cabinets.

Hardware:
Pulls and knobs are available in a variety of styles and are furnished with each order.

Toekick:
Base cabinets are supplied with 1/2" thick material.

( Back To The Top )

Standard

Doors and Drawer Fronts:
Doors and Drawer Fronts are manufactured in house by Bertch Craftsmen.

Drawer Boxes:
Drawer box sides, front and back are 5/8” thick solid birch, dovetailed at all four corners.
Drawer bottom is 1/4” thick plywood.

Drawer Slides:
Drawer slides are an epoxy coated undermount, 3/4 extension, self-closing on nylon rollers for silent movement. They have a load rating of 75 pounds.

Frames:
Face frames are 1 1/2” x 3/4” solid wood.

Case Work:
Sides: All cabinet sides are 1/2” thick plywood with natural birch woodgrain laminate interior
and select hardwood veneer on the exterior.

Backs:
Backs are 1/8” birch woodgrain laminate.

Interiors:
Interiors are birch woodgrain laminate.

Hardware:
Pulls and knobs are available in a variety of styles and are furnished with each order.

Toekick:
Base cabinets are supplied with 1/2" thick material.

( Back To The Top )

Linea (Frameless)

Doors and Drawer Fronts:
Doors and Drawer fronts are manufactured of 3/4" medium density PBC, LP or HP laminate.

Drawer Slides:
Drawer slides are an epoxy coated undermount, 3/4 extension, self-closing on nylon rollers for silent movement. They have a load rating of 75 pounds.

Frames:
Face frames are 1 1/2” x 3/4” solid wood.

Case Work:
Sides: All cabinet sides are 3/4" medium density PBC, LP laminate. Exposed edges are banded with matching PVC. Joints are doweled and glued

Backs:
Backs are 1/8” PBC with LP laminate interior face, dadoed into the sides and top rail of sink
base units and floor.

Hardware:
Pulls and knobs are available in a variety of styles and are furnished with each order.

Toekick:
Base cabinets are supplied with 3/4" thick material matching the casework.

( Back To The Top )